old general electric 200 amp arc welder wisconsin engine

Old General Electric 200 Amp Arc Welder Wisconsin Engine Trial To Heavy

Deep depth, little deformation when welder.

The machine can.

Welding at high power devices, the aspect ratio of up to 5: 1, up to 10: 1(4) can be welded refractory materials, such as titanium, quartz, etc.

After welding a focused laser beam spot available small, precise positioning and can be applied to large-volume automated production of micro, small components(6) can be welded inaccessible parts of the implementation of the non-contact remote welding, with great flexibility.

The laser beam is easy to achieve beam splitting by time and space, capable of multi-beam processing and multi-site processing, for more sophisticated welding provided the conditions.

Laser Average Power 400W(300W200optional Laser Wave Length, 1.064um, Beam Divergence, 10mrad, The largest welding penetration(stainless steel) 3.0mm, The maximum cutting thickness(stainless steel) 2.5mm continuous working hours: 24h, Spot Diameter: 0.3-0.6MM, Maximum load bearing precision three-dimensional electric displacement: 40kg, The three dimensional electric displacement Taiwan trip, X 300mm.

Y 100 mm(precision lead screw and guide rail rigidity) Power Consumpted: 7KW, Imput Power: Three phase four wire system(zero line and ground wire to separate) 380V5 The power rating, 16KW, Operating System, Foot switch control to operate the workbench and laser output, Cooling System: Refrigeration unit circulation water, Usage Environment, Clean.No shaking,Temperature 13 c-28 c, humidity 5 75 Cooling Mode, External Water cooling, Ceramic converging cavity is imported from the Britain.

If you have any questions or need a shipping quote you can reach us at 404-736-6494.

Invertec V300 PRO Multi-Process Welder Top Features Exceptional Multi-Process Fabrication Welding, All input voltages and frequencies are both single and three phase rated- No output derating necessary on single phase.

For all recommended processes from DC TIG to arc gouging.

Input voltage from 208-575 and 50 and 60 Hz operation- One machine runs on virtually any input power supply.

Available in Construction, Factory, Factory(Tweco) and Advanced Process models, the versatile V300 PRO is ready for almost any welding job in shop or outdoor environments.

Exceptional Multi-Process Fabrication Welding- CC- Stick Soft, CC- Stick Crisp, DC TIG, CV- Wire For MIG and Metal-Cored, CV- Innershield and Outershield Flux-Cored, Arc Gouging Accessible from All Modes Plenty of power to handle a 516 in(7.9 mm) carbon, All input voltages and frequencies are both single and three phase rated- No output derating necessary on single phase.

Parallel two units- For 600A carbon arc gouging.

Bright. Large digital amp and volt meters are easy to monitor- Even in sunlight and presettable for precise procedure control.

Lincoln Cooling system included.

No Tig Gun. Located at Attleboro.

Ma Local Pick up or Shipping on Skid LTL or Additional Shipping Charges for delivery on our truck.

This Shopmaster 300 is the answer Call us at 404-736-6494 with any questions or to get a shipping quote.

Welding Capability Not to scale Aluminum Min.

Steel Min. 0.012 0.3 mm) Aluminum Max.

Steel Max. 58 15.9 mm) Complete with: Miller Shopmaster 300 ACDC CCCV Power Source Miller Wire Feeder MIG Gun Ground Lead Stick Lead TIG Torch Flowmeter Hose Features: Fan-On-Demand operates only when needed reducing noise.

Power consumption, and the amount of airborne contaminants pulled through the machine.

Lift-Arc start provides TIG arc starting without the use of high frequency.

LVC Line Voltage Compensation keeps output of the power source constant regardless of fluctuation in input power.

Old General Electric 200 Amp Arc Welder Wisconsin Engine Trial To Heavy

Process TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Industrial to Heavy Industrial Applications Precision Metal Fabrication Maintenance and Repair Light Manufacturing Heavy Manufacturing Aerospace Shipbuilding Tube and Pipe Vocational Specifications Input Power Requires 1-Phase Power Runs on 230 or 460 Volt Rated Output 250 A at 34 VAC.

Duty Cycle 200 A at 32 VAC.

Duty Cycle Welding Amperage Range 3- 310 Amps Net Weight 496 lb(225 kg).

We are a Welding Supply company that has been selling new used welders and welding supplies for over 40 years.

Farm or business and indicate if a fork lift is available at time of delivery.